Filtrovat podle
Nalezen výsledek pro CMM
RSP3 probe change system
RSP3 probe change system Key features of the RCP TC-3 are: Maintains the probe at the operating temperature when not in use, for optimum metrology Allows RSP3-6 and SFP2 probes to be...
REVO legacy head
REVO legacy head A highly accurate dynamic measuring head and probe system which maximises measurement throughput.
Precision sub-contract engineering: increasing manufacturing efficiency through in-process control
Case brief highlighting the challenges faced by a British sub-contractor (QEP) when producing a wide variety of products and how Renishaw systems helped overcome them.
REVO probe change system
REVO probe change system SFP1 and SFS-# The RCP TC-2 (thermally controlled REVO change port) is used for changing SFP1, whereas the RCP2 is configured to change SFP1 styli (SFS-1 and SFS-2).
ZH-TW - 安全
ZH-TW - 安全 警告 請小心不預期的機構操作移動。 使用者應該與測頭座和測針的整個操作運動範圍保持一段安全距離。 機器供應商應確實讓使用者瞭解該系統的整個操作運動範圍。 在使用機器工具或 CMM的應用程序中，建議採用眼部防護措施。 機器供應商有責任確保使用者瞭解操作環境中的任何可能危險，包括在 Renishaw產品使用說明提到的狀況，並務必提供足夠的護具和安全互鎖裝置。...
A-1034-0002 - Ø25 mm datum ball (datum ball only), tungsten carbide ball
The universal datum sphere enhances the use of both manual and automated CMMs It allows for quick and easy adjustment to set ball stem over a wide range of probe datuming angles, allowing for...
A-1034-0005 - Ø12 mm datum ball (datum ball only), tungsten carbide ball
The universal datum sphere enhances the use of both manual and automated CMMs It allows for quick and easy adjustment to set ball stem over a wide range of probe datuming angles, allowing for...
A-1034-0031 - Datum ball kit - Ø3/4" (fixing stud not included), tungsten carbide ball.
The Renishaw universal datum sphere enhances the performance of manual and fully automated CMMs.
A-1034-0032 - Ø3/4" datum ball (datum ball only), tungsten carbide ball
The universal datum sphere enhances the use of both manual and automated CMMs It allows for quick and easy adjustment to set ball stem over a wide range of probe datuming angles, allowing for...
A-1034-0035 - Datum ball kit - Ø1" (fixing stud not included), tungsten carbide ball.
The Renishaw universal datum sphere enhances the performance of manual and fully automated CMMs.
A-1034-0036 - Ø1" datum ball (datum ball only), tungsten carbide ball
The universal datum sphere enhances the use of both manual and automated CMMs It allows for quick and easy adjustment to set ball stem over a wide range of probe datuming angles, allowing for...
R-QLR-1350450 - QuickLoad™ rail 50 mm × 450 mm metric
The 50 mm × 450 mm steel QuickLoad™ rail is to be used in conjunction with the QuickLoad base plates.
R-AH-2545-6 - Ø25.4 mm × 45.0 mm Polyoxymethylene (POM) adjustable height stand with M6 thread
This Polyoxymethylene (POM) adjustable height stand is ideal for holding components at variable heights without marking their surface.
R-AJ-13-6 - Ø15.9 mm adjustable aluminium jack stand with M6 thread
This adjustable jack stand allows for variable heights and locking the workpiece into position. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-AJ-19-8 - Ø19.0 mm adjustable aluminium jack stand with M8 thread
This adjustable aluminium jack stand allows for variable heights and locking the workpiece into position. It is recommended for use on CMMs and the Equator™ gauging system.
R-AJ-25-6 - Ø25.4 mm adjustable aluminium jack stand with M6 thread
This adjustable aluminium jack stand allows for variable heights and locking the workpiece into position.
R-AJ-25-8 - Ø25.4 mm adjustable aluminium jack stand with M8 thread
This adjustable aluminium jack stand allows for variable heights and locking the workpiece into position. It is recommended for use on CMMs and the Equator™ gauging system.
R-AJ-50-20 - Ø0.63 in adjustable aluminium jack stand with 1/4-20 thread
This adjustable jack stand allows for variable heights and locking the workpiece into position. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-AJ-9-4 - Ø9.5 mm adjustable aluminium jack stand with M4 thread
This adjustable aluminium jack stand allows for variable heights and locking the workpiece into position.
R-AJS-35-8 - Ø38.1 mm adjustable steel jack stand with M8 thread
This adjustable jack stand allows for variable heights and locking the workpiece into position. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-APJ-20 - Adjustable pivot joint with 1/4-20 thread
This adjustable aluminium pivot joint is ideal for positioning fixturing components at an angle. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-APJ-6 - Adjustable pivot joint with M6 thread
This adjustable aluminium pivot joint is ideal for positioning fixturing components at an angle. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-APJ-8 - Adjustable pivot joint with M8 thread
This adjustable aluminium pivot joint is ideal for positioning fixturing components at an angle. It is recommended for use on CMMs and the Equator™ gauging system.
R-AS-4-20 - 4.0 in long adjustable slide with 1/4-20 thread
This adjustable aluminium slide is ideal for placing fixturing components between threads on the base plate.
R-AS-70-6 - 72.0 mm long adjustable slide with M6 thread
This adjustable aluminium slide is ideal for placing components in between holes on the plate and can be used for locating workpieces.
R-AS-70-8 - 71.9 mm long adjustable slide with M8 thread
This adjustable aluminium slide is ideal for placing components in between holes on the plate and can be used for locating workpieces.
R-AVP-11-20 - Ø0.99 in × 1.00 in adjustable V post with 1/4-20 thread
This adjustable V post is used to hold cylindrical or tubular parts without marking their surfaces.
R-CC-6 - Centres with Ø6.4 mm pins for use with M4, M6 and 1/4-20 fixturing components
These centres are used for holding cylindrical workpieces at each end on their inside diameters.
R-CJR-3 - Rotational 3-jaw chuck for use with M4, M6 and 1/4-20 base plates
The 3-jaw chuck is used to hold cylindrical workpieces, allowing the probe to measure or scan around the part without any interference.
R-CMV-20 - 2.25 in × 1.25 in × 1.25 in mini vice with adjustable 0.59 in jaws and 1/4-20 thread
This mini vice is recommended for clamping a small area of a workpiece on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-CMV-4 - 57.2 mm × 31.8 mm × 31.8 mm mini vice with adjustable 15.0 mm jaws and M4 thread
This mini vice is recommended for clamping a small area of a workpiece on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-CP-20 - 1/4-20 pusher clamp
This pusher clamp is used to push a workiece against standoffs or into a corner.
R-CP-4 - M4 pusher clamp
This pusher clamp is used to push a workiece against standoffs or into a corner.
R-CP-6 - M6 pusher clamp
This pusher clamp is used to push a workiece against standoffs or into a corner.
R-CSPS-1210-4 - Ø12.0 mm × 10.0 mm spring pusher standoff clamp with M4 thread
The spring pusher standoff clamp is designed to fixture workpieces in tight spaces, removing the need for tension clamps.
R-CSPS-1925-6 - Ø19.1 mm × 25.0 mm spring pusher standoff clamp with M6 thread
This spring pusher standoff clamp is designed to fixture workpieces in tight spaces, removing the need for tension clamps.
R-CT-160-125-20 - 1.43 in tension clamp with 1.26 in post and 1/4 20 thread
This tension clamp is used for the quick and easy clamping of parts onto CMMs, Vision and the Equator™ gauging systems.
R-CT-250-275-20 - 2.26 in tension clamp with 2.76 in post and 1/4-20 thread
This tension clamp is used for the quick and easy clamping of parts onto CMMs, Vision and the Equator™ gauging systems.
R-CT-375-325-20 - 3.45 in tension clamp with 3.26 in post and 1/4 20 thread
This tension clamp is used for the quick and easy clamping of parts onto CMMs, Vision and the Equator™ gauging systems.
R-CT-40-70-8 - 36.2 mm tension clamp with 68.1 mm post and M8 thread
This tension clamp is used for the quick and easy clamping of parts onto CMMs and the Equator™ gauging systems.
R-CTT-160-125-20 - 1.42 in soft tip tension clamp with 1.26 in post and 1/4-20 thread
This tension clamp has a rubber-coated tip to hold workpieces without scratching or marking the workpiece surfaces. It is recommended for use on CMMs, Vision and the Equator™ gauging system.
R-CTT-160-275-20 - 1.42 in soft tip tension clamp with 2.76 in post and 1/4-20 thread
This tension clamp has a rubber-coated tip to hold workpieces without scratching or marking the workpiece surfaces.
R-CTT-40-70-8 - 36.2 mm soft tip tension clamp with 68.1 mm post and M8 thread
This tension clamp has a rubber-coated tip to hold workpieces without scratching or marking the workpiece surfaces. It is recommended for use on CMMs and the Equator™ gauging system.
R-CTT-95-83-8 - 87.7 mm soft tip tension clamp with 82.8 mm post and M8 thread
This tension clamp has a rubber-coated tip to hold workpieces without scratching or marking the workpiece surfaces. It is recommended for use on CMMs and the Equator™ gauging system.
R-CVM-20 - 1/4-20 micro vice clamp
This micro vice clamp is recommended for clamping small workpieces on CMMs and the Equator™ gauging system.
R-CVM-B-20 - 1/4-20 micro vice clamp with base
This micro vice clamp with base is used for holding small workpieces.
R-CWT-25-25-4 - 31.3 mm soft tip spring wire clamp with 25.0 mm post and M4 thread
This spring wire clamp is ideal for the light clamping of small workpieces.
R-CWT-50-50-6 - 49.7 mm soft tip spring wire clamp with 50.0 mm post and M6 thread
This spring wire clamp is ideal for the light clamping of small workpieces.
R-M-13-4 - Ø12.7 mm × 25.0 mm magnetic standoff with M4 thread
This magnetic standoff is ideal for holding ferrous workpieces and is very hard wearing. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-M-13-8 - Ø12.7 mm × 25.0 mm magnetic standoff with M8 thread
This magnetic standoff is ideal for holding ferrous workpieces and is very hard wearing. It is recommended for use on CMMs and the Equator™ gauging system.