Filter by
Results found for tp6
TP2/TP6 tool kit
Tool kit for installing and maintaining TP2 and TP6.
IS1-2 interface selector
IS1-2 interface selector Part Number Price (€) Extended Warranty (€) Probe interfaces selectors IS1-2 probe interface selector (Supplied with TP7, SP600 and OTP6 modules fitted and SP25...
Head connectors
Head connectors Each pin carries different signals depending on the probe type used 2-wire probe signals (e.
Touch-trigger probe systems: TP1, TP2, TP6, TP6A, PH1, PH6 and PH6M (H-1000-5021)
TP1(S) - A robust shank-mounted probe offering generous overtravel, ideally suited to manual CMMs.
Manual probe heads product overview
Manual probe heads product overview Renishaw manual probe heads detailed in this user's guide are designed to suit any CMM and this specifically covers: PH1 PH6 PH6M Each is designed for a specific...
Multiple Renishaw probe type installations
Multiple Renishaw probe type installations For installations using SP25M and other Renishaw probing systems, Renishaw has developed the IS1-2 interface selector system.
PH6M fixed head with autojoint connector for probes and adaptors
The PH6M is compatible with multiwired probes TP7M, OTP6M and SP600M, as well as the complete Renishaw probe range through the use of the PA series of adaptors.
TP1(S) legacy probe
TP1(S) legacy probe Specification Principal application Manual CMMs Sense directions 5-axis: ±X, ±Y, +Z Unidirectional repeatability maximum (2σ μm) (at stylus tip) 0.
13.0 mm 'C' spanner
C spanner for use with TP20, TP6 and TP2.
Double-ended 'C' spanner
Double-ended C spanner for use with TP20 and TP6.
Double-ended 'C' spanner
Double ended 'C' spanner for use with TP20 and TP6.
UCC MMI legacy controller
UCC MMI legacy controller The UCC MMI is the interface between a manual CMM and a user (via a PC) Dimensions The UCC MMI CMM controller has the capability of: Controlling three axes of a CMM...
Technical specification
Technical specification Measuring performance Positional repeatability (2σ) (At stylus tip with TP20 probe, standard force module and 10 mm stylus length) 1.
Product CAD models
Product CAD models 3-axis systems Manual systems Accessories Controllers and interfaces Links to our CAD models are listed below.
Touch-trigger probe pre-travel variation
Angle of approach vs. pre-travel required to trigger a TP6 touch trigger probe
PI 7-3 (H-1000-7555)
The PI 7-3 is a dedicated signal conditioner for interfacing the TP7M series of probes or touch-trigger probe types such as TP2, TP20 or TP6 / TP6A, to the CMM controller.
PH1 shank mounted manual probe head
The PH1 is a general purpose, swivel-type probe head. Its compact design makes it ideally suited to a CMM where manual orientation of a Renishaw M8 touch-trigger probe is required.
System overview
System overview SPA3 is a servo power amplifier with enhancements for higher power and category 2 E-STOP.
PICS connector
PICS connector This socket is intended for use with the TP1, TP2, TP6 or TP20 touch-trigger probes.
3-axis systems
3-axis systems Contents 3-axis motorised probe heads PH10T PH10M / PH10MQ PHS1 PH10M thumbnail PH10MQ motorised head PHS motorised probe head PH10T motorised indexing probe head PH10M moto...
MIH specification
MIH specification Mechanical specification Probe mounting Renishaw autojoint Autojoint repeatability (at the stylus tip) (2σ) 0.
PICS (9W 'D' socket)
PICS (9W 'D' socket) Pin number Function 1 /PICS STOP/ (active low) 2 /PICS PPOFF/ (active low) probe power off 3 0 V 4 PICS LED anode 5 Probe signal 6 Reserved 7 /PICS PDAMP/ (active low)...
TP6A
TP6A touch-trigger probe body.
PI 4-2 (H-1000-5004) - legacy
The PI 4-2 is a basic probe interface for use with Renishaw’s conventional touch‑trigger probes (TP1, TP20, TP6, MH20i etc.
IS1-2 system description
IS1-2 system description An OTP6M module will be supplied in the IS1-2 kit.
System overview
System overview UCC T3 is an addition to the Renishaw CMM controller product range.
Compatible Renishaw products
Compatible Renishaw products Renishaw have a number of probe heads and probes that have either the male or female part of the autojoint fitted to them and are therefore compatible for use with the ACR3.
References for the PH10
References for the PH10 The following Renishaw documentation is referred to in this document or may be a source of further relevant information, these documents can be downloaded from the...
PHC10-3 front panel LEDS
PHC10-3 front panel LEDS PHC10-3 LED names, colours and functions Name Colour Function POWER Green Power ON when lit STOP Red PHC10-3 asserting PICS STOP when lit PI200 asserting PICS STOP ...
Autojoint system
Autojoint system NOTE: If a probe extension bar is manually locked (using an S10 autojoint key), it is advisable to lock it fully to the cam end stop then back the screwdriver slot off by approximately 5.
MCG machine checking gauge
MCG machine checking gauge Checking time CNC (DCC) machine Typically 15 minutes Joystick machine Typically 45 minutes Manual machine Typically 45 minutes Measuring range Vertically ±45° ‡...
PH6 fixed head with autojoint connector for probes and adaptors
The PH6 is a small diameter, vertical probe head with one M8 thread probe mount for a single probe, with an integral cable.
PH10 Motorised Probe Head Specification
PH10 Motorised Probe Head Specification Environmental conditions The following environmental conditions comply with those defined in BS EN61010 - 1:2001: Indoor use IP30 (no protection against...
UCC MMI-2 introduction
UCC MMI-2 introduction The UCC MMI-2 controller provides a USB based interface for manual CMMs.
PH10 Compatible Probes
PH10 Compatible Probes M8 touch-trigger probes This range of probes utilises the M8 bush for mounting to the head.
PHC10-3 PLUS front panel LEDS
PHC10-3 PLUS front panel LEDS NOTE: The probe reset button on the front of PHC10-3 PLUS only functions if a probe interface card is installed within the unit.
MIH accessories
MIH accessories MAPS (manual autojoint probe stand) The Renishaw manual autojoint probe stand (MAPS) is a low-cost storage rack for up to six autojointed probe / extension combinations.
