Filter by
Results found for “Manual setting and NC programming is needless torture for machine operators…”
CMM cables introduction
CMM cables introduction This guide contains comprehensive information on the most commonly used Renishaw cables.
MCG introduction
MCG introduction Renishaw's machine checking gauge (MCG) (as shown above) provides an easy way to monitor the volumetric measurement performance of your co-ordinate measuring machine (CMM).
Taking precision to new heights - air bearing stages with Renishaw optical encoders
TOYO Nano System Corporation has developed motion stages with a coplanar, patented machine design that use Renishaw’s high-precision optical encoders for position feedback.
SP25M installation and integration guide
SP25M is a compact and versatile probe system that provides both scanning capability for form measurement or reverse engineering and touch-trigger probing for geometric size and position measurement.
Service and support
A flexible range of maintenance contract options, including software maintenance; calibration, preventative maintenance and emergency support; out-of-hours support and top-up software training.
A-6767-0050 - RKLF20-S linear encoder tape scale (20 µm scale pitch, for ATOM™ and ATOM DX™ readheads)
A-6767-0050 RKLF20-S linear encoder tape scale (20 µm scale pitch, for ATOM™ and ATOM DX™ readheads) A-6767-0050 is a 0.5 m (500 mm) length of RKLF20-S incremental encoder tape scale.
UCC T3 PLUS and UCC S3 product compliance
UCC T3 PLUS and UCC S3 product compliance Contact Renishaw plc or visit www.
QE Series Interview
An interview style movie to promote the QE system highlighting, new radio protocol, size of the QE interface, probe setup, battery life and automated tool setting and part setting.
R-CT-160-125-20 - 1.43 in tension clamp with 1.26 in post and 1/4 20 thread
This tension clamp is used for the quick and easy clamping of parts onto CMMs, Vision and the Equator™ gauging systems.
R-CT-250-275-20 - 2.26 in tension clamp with 2.76 in post and 1/4-20 thread
This tension clamp is used for the quick and easy clamping of parts onto CMMs, Vision and the Equator™ gauging systems.
R-CT-375-325-20 - 3.45 in tension clamp with 3.26 in post and 1/4 20 thread
This tension clamp is used for the quick and easy clamping of parts onto CMMs, Vision and the Equator™ gauging systems.
New software functionality improves accuracy for measuring long axes in demanding environments
The latest version of Renishaw’s CARTO software (v4.
R-AS-4-20 - 4.0 in long adjustable slide with 1/4-20 thread
This adjustable aluminium slide is ideal for placing fixturing components between threads on the base plate.
R-RCA-25-8 - Ø25.4 mm x 25.0 mm aluminium resting cone with M8 thread
This aluminium cone is ideal for resting or locating workpieces with a single point of contact. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-AS-1-20 - 1.37 in long adjustable slide with 1/4-20 thread
This adjustable aluminium slide is ideal for placing fixturing components between threads on the base plate.
R-AS-3-20 - 3.0 in long adjustable slide with 1/4-20 thread
This adjustable aluminium slide is ideal for placing fixturing components between threads on the base plate.
R-RCA-25-6 - Ø25.4 mm × 25.0 mm aluminium resting cone with M6 thread
This aluminium cone is ideal for resting or locating workpieces with a single point of contact. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
Calibration
Calibration services are carried out by skilled technicians at all our service and test centres across the world. On-site calibration is also possible for larger systems.
Why use a laser interferometric encoder?
The laser interferometer is so far the most advanced technology used for precision feedback.
Manufacturing
The new facility at Stonehouse has enabled Renishaw's Manufacturing Services Division (MSD) to plan the layout of the Group's piece part manufacturing operations within the 80,000 ft sq of factory space.
A-5314-0015 - OMM-2C cable assembly (8 m)
A-5314-0015 OMM-2C cable assembly (8 m) Cable assembly for linking the OMM-2C optical machine module and OSI optical interface.
A-5314-0016 - OMM-2C cable assembly (15 m)
A-5314-0016 OMM-2C cable assembly (15 m) Cable assembly for linking the OMM-2C optical machine module and OSI optical interface
Interferometric laser encoders
Renishaw provides high performance interferometric laser encoders solutions for OEM machine builders, ranging from large aerospace centres through to the high precision semiconductor industry.
Renishaw's service options
Renishaw's service options Product servicing Renishaw has developed a range of service solutions designed to best meet the needs of our customers.
High accuracy magnetic ring encoders are a perfect fit for Martech’s subsea application
High accuracy magnetic ring encoders made by RLS, a Renishaw associate company, are used by Martech of Dorset in its Pan and Tilt units for positioning subsea sonar-imaging devices.
R-RCA-1-20 - Ø1.00 in × 1.00 in Aluminium resting cone with 1/4-20 thread
This aluminium cone is ideal for resting or locating workpieces with a single point of contact. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-RPA-4 - Ø6.4 mm x 5.0 mm aluminium resting pin with M4 thread
This aluminium pin is ideal for resting or locating workpieces with a single, rounded, point of contact.
Lasing Microsystem S.A. establish relationship with Renishaw as a solution provider for high accuracy and position checking applications
Gonzalo Guadaño is the Director of Laser Systems Development at Lasing Microsystem S.
Customer investment in alignment laser improves efficiency by 50%
The commercial success of building custom-made machine tools requires careful attention and efficiency.
PH1
PH1 The PH1 is a general purpose, swivel-type probe head.
A-5991-0005 - OMM-2C optical machine module (air blast)
A-5991-0005 OMM-2C optical machine module (air blast) OMM-2C optical machine module (integrated air blast) with 7-way socket and product support card.
R-PCA-135075-12-6 - 25.4 mm × 50.8 mm × 76.2 mm adjustable angle plate with M6 thread
This adjustable angle plate is ideal for holding components at an angle.
R-PCA-135075-10-4 - 25.4 mm × 50.8 mm × 76.2 mm adjustable angle plate with M4 thread
This adjustable angle plate is ideal for holding components at an angle.
R-PCA-5023-50-20 - 1.00 in × 2.00 in × 3.00 in adjustable angle plate with 1/4-20 thread
This adjustable angle plate is ideal for holding components at an angle.
REVO valve seat and guide measurement
REVO® and Renishaw's 5-axis technology dramatically increase throughput in this challenging application – data collection process takes approximately 20 seconds.
Webinar – Resonance Raman spectroscopy for redox biology research
Resonance Raman spectroscopy for redox biology research. A webinar presented by Dr Katherine Lau and Dr James Armstrong
A-5000-3712 - M4 Ø6 mm ruby ball, ceramic stem, L 100 mm
Straight styli are designed to inspect simple features where direct, unobstructed contact with a measured surface is possible.
R-RPS-6 - Ø9.5 mm x 10.0 mm 303 stainless steel resting pin with M6 thread
This steel pin is ideal for resting or locating workpieces with a single, rounded, point of contact.
From summer intern to UK Service and Support Manager: The route to expertise
By working for Renishaw, you will be making a difference in a highly successful global company that actively encourages open communication and innovative thinking.
R-S-1210-4 - Ø12.0 mm × 10.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-1225-4 - Ø12.0 mm × 25.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-125-4 - Ø12.0 mm × 5.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-625-4 - Ø6.0 mm × 25.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-910-4 - Ø9.0 mm × 10.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-925-4 - Ø9.0 mm × 25.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-95-4 - Ø9.0 mm × 5.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-1215-4 - Ø12.0 mm × 15.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-1220-4 - Ø12.0 mm × 20.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-1250-4 - Ø12.0 mm × 50.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-S-610-4 - Ø6.0 mm × 10.0 mm aluminium standoff with M4 thread
This aluminium standoff is ideal to elevate and locate workpieces. It is black anodised and recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.