Filter by
Results found for incise™ dental CAD/masters/
Primo™ system helps SuMax Enterprises to reduce part set-up time by 90%
Maintaining the wall thickness of pump bodies and reducing the part setting time for manufacturing steering worm shafts is an important task for SuMax Enterprises Pvt Ltd, situated in Pune, India.
TI0000A00A - Ti analogue output (1 Vpp) interface for TONiC™ encoder readheads
Ti0000A00A is a Ti interface for use with TONiC readheads, in the form of a robust convenient connector. It has industry standard 1 Vpp analogue outputs and a maximum speed of 10 m/s.
R-RPA-4 - Ø6.4 mm x 5.0 mm aluminium resting pin with M4 thread
This aluminium pin is ideal for resting or locating workpieces with a single, rounded, point of contact.
R-RCA-1-20 - Ø1.00 in × 1.00 in Aluminium resting cone with 1/4-20 thread
This aluminium cone is ideal for resting or locating workpieces with a single point of contact. It is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines.
R-T-1512-20 - 2.00 in × 1.50 in × 12.00 in tower (4 sides, 2 rows) with 1/4-20 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has 1/4-20 threaded holes and is recommended for use on CMM and Equator™ gauging systems.
R-CC-6 - Centres with Ø6.4 mm pins for use with M4, M6 and 1/4-20 fixturing components
These centres are used for holding cylindrical workpieces at each end on their inside diameters.
R-T-16-20 - 1.00 in × 1.00 in × 6.00 in tower (4 sides, 1 row) with 1/4-2- thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has 1/4-20 threaded holes and is recommended for use on CMM and Equator™ gauging systems.
R-T-230-20 - 2.00 in × 2.00 in × 30.00 in tower (4 sides, 2 rows) with 1/4-20 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has 1/4-20 threaded holes and is recommended for use on CMM and Equator™ gauging systems.
R-CC-13 - Centres with Ø12.7 mm pins for use with M4, M6, M8 and 1/4-20 fixturing components
These centres are used for holding cylindrical workpieces at each end on their inside diameters.
R-CC-25 - Centres with Ø25.4 mm pins for use with M4, M6, M8 and 1/4-20 fixturing components
These centres are used for holding cylindrical workpieces at each end on their inside diameters.
R-T-1518-20 - 2.00 in × 1.50 in × 18.00 in tower (4 sides, 2 rows) with 1/4-20 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has 1/4-20 threaded holes and is recommended for use on CMM and Equator™ gauging systems.
R-T-224-20 - 2.00 in × 2.00 in × 24.00 in tower (4 sides, 2 rows) with 1/4-20 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has 1/4-20 threaded holes and is recommended for use on CMM and Equator™ gauging systems.
Project MARCH builds exoskeleton to aid mobility for people with spinal cord injuries
Project MARCH is a non-profit, multi-disciplinary student team from the Delft University of Technology in the Netherlands.
R-RPS-6 - Ø9.5 mm x 10.0 mm 303 stainless steel resting pin with M6 thread
This steel pin is ideal for resting or locating workpieces with a single, rounded, point of contact.
R-CP-4 - M4 pusher clamp
This pusher clamp is used to push a workiece against standoffs or into a corner.
R-CP-6 - M6 pusher clamp
This pusher clamp is used to push a workiece against standoffs or into a corner.
QUANTiC™ optical incremental encoder series
The QUANTiC encoder series is Renishaw's incremental open optical encoder with digital or analogue output options, robust metrology, high speed measurement, and easy installation and set-up.
OnAxis™ encoder technology
OnAxis™ encoder technology article
SiGNUM™ RELM system
SiGNUM™ RELM system image
On-machine scanning - High speed part set-up
Using the Renishaw OSP60 scanning probe with SPRINT™ technology to 1) measure prismatic features for very fast part set-up using SupaScan, 2) measure flat sealing faces for high point and low point...
R-CP-20 - 1/4-20 pusher clamp
This pusher clamp is used to push a workiece against standoffs or into a corner.
R-CTB-1-20 - 1/4-20 tension clamp bracket
This tension clamp bracket attaches to a standoff and holds the tension clamp at an angle.
R-CTB-75-20 - 1/4-20 tension clamp bracket
This tension clamp bracket attaches to a standoff and holds the tension clamp at an angle.
introducing EVOLUTE™
An introduction to the EVOLUTE™ encoder series.
introducing RESOLUTE™
An introduction to the RESOLUTE™ encoder series.
introducing SiGNUM™
An introduction to the SiGNUM™ encoder series.
R-SPD-1325-6 - Ø12.5 mm × 25.0 mm Polyoxymethylene (POM) standoff with M6 thread
This Polyoxymethylene (POM) standoff is ideal to elevate and locate workpieces against a pin using a non-marking material.
R-SPD-910-4 - Ø9.0 mm × 10.0 mm Polyoxymethylene (POM) standoff with M4 thread
This Polyoxymethylene (POM) standoff is ideal to elevate and locate workpieces against a pin using a non-marking material.
Replace manual gauges with new INTUO™ software for Equator™
The Renishaw Equator™ flexible gauge is now offered with the new INTUO™ gauging software, combined with a range of industry standard Renishaw probes.
R-AH-2545-6 - Ø25.4 mm × 45.0 mm Polyoxymethylene (POM) adjustable height stand with M6 thread
This Polyoxymethylene (POM) adjustable height stand is ideal for holding components at variable heights without marking their surface.
Renishaw introduces powerful MODUS™ IM Equator intelligent metrology software
Renishaw, a global leader in engineering technologies, will introduce its new MODUS™ IM Equator software at EMO Hannover 2025.
A-9414-1226 - 1.5 m cable for ATOM DX™ top exit encoder readheads
A 1.5 m cable for ATOM DX top exit configurations. This cable terminates with a 15-way D-type connector, which also enables connection to ADTi-100 Advanced Diagnostic Tool.
R-CTT-40-30-6 - 36.2 mm soft tip tension clamp with 30.0 mm post and M6 thread
This tension clamp has a rubber-coated tip to hold workpieces without scratching or marking the workpiece surfaces.
R-CTT-40-70-6 - 36.2 mm soft tip tension clamp with 68.1 mm post and M6 thread
This tension clamp has a rubber-coated tip to hold workpieces without scratching or marking the workpiece surfaces.
R-CTT-64-70-6 - 57.5 mm soft tip tension clamp with 68.1 mm post and M6 thread
This tension clamp has a rubber-coated tip to hold workpieces without scratching or marking the workpiece surfaces.
R-CTT-95-83-6 - 87.7 mm soft tip tension clamp with 82.8 mm post and M6 thread
This tension clamp has a rubber-coated tip to hold workpieces without scratching or marking the workpiece surfaces.
R-T-25300-8 - 25 mm × 25 mm × 300 mm tower (4 sides, 1 row) with M8 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has M8 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM and Equator™ gauging systems.
R-T-35300-6 - 35 mm × 35 mm × 300 mm tower (4 sides, 2 rows) with M6 thread
This tower is used to fixture large components or to hold a part vertically. It has M6 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM and Equator™ gauging systems.
R-T-35300-8 - 35 mm × 35 mm × 300 mm tower (4 sides, 2 row) with M8 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has M8 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM and Equator™ gauging systems.
R-T-50600-6 - 50 mm × 50 mm × 600 mm tower (4 sides, 2 row) with M6 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has M6 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM and Equator™ gauging systems.
R-T-50600-8 - 50 mm × 50 mm × 600 mm tower (4 sides, 2 rows) with M8 thread
This tower is used to fixture large componentworkpieces or to hold a workpiece vertically.
R-T-50750-6 - 50 mm × 50 mm × 750 mm tower (4 sides, 2 rows) with M6 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has M6 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM and Equator™ gauging systems.
R-T-50750-8 - 50 mm × 50 mm × 750 mm tower (4 sides, 2 rows) with M8 thread
This tower is used to fixture large workpieces or to workpiece a part vertically. It has M8 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM and Equator™ gauging systems.
R-T-25150-6 - 25 mm × 25 mm × 150 mm tower (4 sides, 1 row) with M6 thread
This tower is used to fixture large workpieces or to hold a workpiece vertically. It has M6 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM and Equator™ gauging systems.
R-T-35450-6 - 35 mm × 35 mm × 450 mm tower (4 sides, 2 rows) with M6 thread
This tower is used to fixture large components or to hold a part vertically. It has M6 threaded holes spaced at 12.5 mm intervals and is recommended for use on CMM and Equator™ gauging systems.
A-5504-0200 - M6 Equator™ fixture tile, 300 x 300 mm
This 300 x 300 mm fixture tile has 41 M6 threaded holes.
A-5504-0202 - M8 Equator™ fixture tile, 300 x 300 mm
This 300 x 300 mm fixture tile has 41 6.
Sample solid models for use with Productivity+™ training modules
.zip file containing sample solid models (Parasolid .x_t format) for use with Productivity+™ training modules
R-CTB-19-6 - M6 tension clamp bracket for use with Ø19.4 mm standoffs
This tension clamp bracket attaches to a standoff and holds the tension clamp at an angle.
R-CTB-25-6 - M6 tension clamp bracket for use with Ø25.6 mm standoffs
This tension clamp bracket attaches to a standoff and holds the tension clamp at an angle.