Filter by
Results found for “Manual setting and NC programming is needless torture for machine operators…”
Renishaw encoders drive improvements in the performance of direct-drive motors
Vacuum technology is used in many high-precision manufacturing processes. Typical applications include semiconductor wafer inspection, wafer bonding, photolithography and thin film deposition.
RESOLUTE™ UHV absolute optical encoder system
Renishaw’s true absolute optical encoder, is now available in an Ultra-High Vacuum compatible version, in both linear and rotary (angle) encoder formats.
PHS-2 (H-1000-5620)
PHS-2 is designed to meet the arduous requirements of 'body-in-white' measurement, where fine angular position and long reach are needed.
RESM20USA115 - RESM incremental tapered internal diameter ring (115 mm diameter, 20 μm pitch, one reference mark (standard))
RESM20USA115 is a 115 mm diameter, 20 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM40USA200 - RESM incremental tapered internal diameter ring (200 mm diameter, 40 μm pitch, one reference mark (standard))
RESM40USA200 is a 200 mm diameter, 40 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM20USA150 - RESM incremental tapered internal diameter ring (150 mm diameter, 20 μm pitch, one reference mark (standard))
RESM20USA150 is a 150 mm diameter, 20 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM40USA052 - RESM incremental tapered internal diameter ring (52 mm diameter, 40 μm pitch, one reference mark (standard))
RESM40USA052 is a 52 mm diameter, 40 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM20USA075 - RESM incremental tapered internal diameter ring (75 mm diameter, 20 μm pitch, one reference mark (standard))
RESM20USA075 is a 75 mm diameter, 20 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM20USA100 - RESM incremental tapered internal diameter ring (100 mm diameter, 20 μm pitch, one reference mark (standard))
RESM20USA100 is a 100 mm diameter, 20 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM40USA100 - RESM incremental tapered internal diameter ring (100 mm diameter, 40 μm pitch, one reference mark (standard))
RESM40USA100 is a 100 mm diameter, 40 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM40USA150 - RESM incremental tapered internal diameter ring (150 mm diameter, 40 μm pitch, one reference mark (standard))
RESM40USA150 is a 150 mm diameter, 40 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM20USA200 - RESM incremental tapered internal diameter ring (200 mm diameter, 20 μm pitch, one reference mark (standard))
RESM20USA200 is a 200 mm diameter, 20 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM40USA075 - RESM incremental tapered internal diameter ring (75 mm diameter, 40 μm pitch, one reference mark (standard))
RESM40USA075 is a 75 mm diameter, 40 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
RESM20USA052 - RESM incremental tapered internal diameter ring (52 mm diameter, 20 μm pitch, one reference mark (standard))
RESM20USA052 is a 52 mm diameter, 20 µm pitch, stainless steel encoder ring incorporating an IN-TRAC™ optical reference mark.
Rotational 3-jaw clamp for use with M4 and M6 base plates
This 3-jaw clamp is used to hold cylindrical parts, allowing the probe to measure or scan around the part without any interference. Old design - pre 2019.
Renishaw showcases smart factory solutions at IMTEX 2019
Global engineering company, Renishaw, returns to IMTEX for the show’s 50th anniversary, which is taking place at the Bangalore International Exhibition Centre, Bangalore, India from January 24th to...
RLR10-A3-XF - 3 mm beam retroreflector
A retro-reflector optic mounted within a aluminium housing which contains a through hole suitable for a M3 screw for ease of mounting.
Length tool setter (LTS) machine mounted on adaptor plate
Length tool setter (LTS) machine mounted on adaptor plate
MCG testing CMM
MCG test being performed on a Messier Dowty CMM fitted with a Renishaw SP25M scanning system landing gear machine checking gauge
MCG testing CMM navigation image
MCG test being performed on a Messier Dowty CMM fitted with a Renishaw SP25M scanning system landing gear machine checking gauge
SCR600 pick up / put down routine
SCR600 pick up / put down routine CAUTION: When performing a stylus module change with PH10 PLUS and SP600M, always lock and unlock in free space to ensure repeatability.
LP2 LTO2(F) probe system for lathes
LP2 LTO2(F) probe system for lathes
Renishaw unveils Inspection Plus with SupaTouch optimisation delivering intelligent speed
Renishaw, a market-leading engineering technologies company, will introduce Inspection Plus with SupaTouch optimisation at EMO 2015, Milan, Italy (5th-10th October, hall 5 stand D15).
Renishaw's Machine Shop (MMS magazine - 10/2007)
Article about Renishaw's Stonehouse factory published by Modern Machine Shop magazine in October 2007
Renishaw and BEGO conclude additive manufacturing licensing agreement
Renishaw plc, the global engineering technologies company, and BEGO Bremer Goldschlägerei Wilh.
SP80 and SP80H
The SP80 is an ultra-accurate quill-mounted scanning probe with long stylus carrying capacity.
Liam Fox with Renishaw metal additive manufacturing machine
Renishaw, the global engineering technologies company, hosted a visit to its Pune, India facility on 9th November 2016 by The Rt Hon Liam Fox MP, British Secretary of State for International Trade.
ACS-1 advanced calibration sphere
Principal application: The lockable calibration disk provides a datum surface for accurate probe length calibration. The datum sphere is used to accurately calibrate the probe’s stylus ball diameter.
Connectivity
Connectivity The UCC PI 80 has different configuration layouts to provide an interface to CMM systems with three, four or five machine axes, whether brushed or brushless motors.
Probe extension bars
Probe extension bars Renishaw manufactures a comprehensive range of extension bars and adaptors to allow increased component access.
Renishaw nominated for national Investor Relations award
Renishaw, the FTSE 250 listed global engineering company, and its Head of Communications Chris Pockett, have been nominated for the ‘Best Investor Relations Communications’ Award at the UK Stock...
Breda Business Update (December 2006): Town council commends Renishaw and new building
December 2006 issue (number 3) of Breda Business Update in which the town council comment upon Renishaw's business and the new building project at Van de Reystraat.
soft tip 50 mm spring wire clamp with 50 mm post
With rubber coated tips for light clamping of small parts, minimising the contact area on a part and for least possible obstruction.
Primo™ system
PRIMO™ system. Low-risk investment for fast payback. Exceptional ease of use. Outstanding performance for increased yield and shorter cycle times.
M4 soft tip spring wire clamp
With rubber coated tips for light clamping of small parts, minimising the contact area on a part and for least possible obstruction.
Primo twin probe system
PRIMO™system. Low-risk investment for fast payback. Exceptional ease of use. Outstanding performance for increased yield and shorter cycle times.
OTS
Image of the OTS tool setting system
OTS (both versions)
Image of Renishaw's OTS tool setting units
Productivity+™ Adaptive Cut Toolkit
The Productivity+™ Adaptive Cut Toolkit offers machinist the ability to adaptively cut parts, for applications like chamfering on near net shape parts quickly and accurately without the use of...
SAME DEUTZ-FAHR - TRS2 tool breakage detection
Lamborghini saves €150K a year with Renishaw tool breakage detection systems.
Illustration of ballscrew for FORTiS application note (semi-closed loop)
Webpage image for FORTiS application note
Renishaw and Dassault Systemes pool expertise for the integrated AM experience
News release announcing Renishaw collaboration with Dassault systems to enhance software for metal additive manufacturing
RMP600 measuring impeller
RMP600 measuring impeller on a 5-axis machine tool.
QC20 ballbar with small circle accessory kit
Zip file containing CAD models for the QC20 assembly and small circle accessory kit in .x_t, .igs, .stp and .jpg formats.
Chart showing revenue for the Renishaw group up to the year 2021
Chart showing revenue for the Renishaw group up to the year 2020 (jpg)
FR - Sécurité
FR - Sécurité ATTENTION: Avant de déballer et d'installer le système REVO, l'utilisateur doit lire attentivement les instructions de sécurité suivantes et faire en sorte qu'elles soient...
Dr. Andrew Shubin of NT-MDT (Russia) and Dr. Ken Williams of Renishaw plc (UK) signing the OEM agreement
During the recent International Raman Microscopy Conference (ICORS XXI) in London, Dr.