Filter by
Results found for renishaw
Scale interface (15W HDD socket)
Scale interface (15W HDD socket) NOTE: If the machine scale is of a different format (e.
Magnetic encoders contribute to reliable wafer transfer robots
A wafer ultimately becomes multiple IC-units in a series of complicated processes, where wafers rely on a wafer transfer robot to perform fast and accurate transfers between process stations.
SPAlite legacy servo power amplifier
SPAlite legacy servo power amplifier Suitable for CMMs up to about 1 m cubed in measuring volume Compatible with UCClite-2 and UCC2-2 Variable velocity feedback systems compatible (tacho, tacholess...
RVP REVO vision probe
The REVO vision probe (RVP) provides non-contact vision measurement on an infinitely positioning, 5-axis platform.
Scale interface (4 × 15W HDD sockets)
Scale interface (4 × 15W HDD sockets) UCC BI scale error interface circuit The UCC BI supports the error signal provided by Renishaw's digital incremental encoders.
Robot health and calibration tracking software
The RCS Software Suite accompanies the RCS range of ballbar toolkits for robot verification and accuracy.
E-STOP (9W 'D' plug)
E-STOP (9W 'D' plug) E-STOP electrical characteristics A manual reset button (refer to BS EN ISO13849-1:2015 (or current version) para.
The ACR1 autochange rack
The ACR1 autochange rack Adjustable base - mounting and adjustment 1.
Usage
Usage Support documents providing advice and assistance on issues which may be encountered when using Productivity+™ applications.
Aligning the head
Aligning the head Rotate the AM1 until free and remove.
SPA3-2
SPA3-2 servo power amplifier with support for absolute BiSS readheads, enhanced machine I/O and up to four axes of position feedback for dual Y scale machines.
Metal 3D printing pushes the boundaries in Moto2™ through defiant innovation
Race winning Moto2 team TransFIORmers is using cutting edge additive manufacturing (metal 3D printing) technology in an unconventional front suspension system to gain a significant competitive advantage.
UCC2 and UCC2-2 troubleshooting
UCC2 and UCC2-2 troubleshooting Fatal faults Some conditions can arise which mean that it is inadvisable or even dangerous to continue using the CMM servo system.
Automatic operation
Automatic operation PHS axis origin position relative to pin datum point XD, YD, ZD This table gives co-ordinates for the points in the automatic change cycle relative to the pin datum...
RESOLUTE™ encoders make RF antenna positioning accuracy and resolution one hundred times better
Pacific Antenna Systems (PAS) designs, fabricates and manufactures state-of-the-art antenna systems that use radio frequencies (RF) ranging from 1–110 GHz.
Part number summary
Part number summary Description Part number TP200 probe kit 1 (including standard force module) A-1207-0001* TP200 probe kit 2 (including low force module) A-1207-0002* ...
Bastion develops track bike components using additive manufacturing (AM)
Bastion Advanced Engineering and Design (BAED) have unveiled a new and innovative line-up of products targeted at further improving the performance and competitiveness of athletes on the track.
ATOM DX™ incremental encoder system with RCDM rotary (angle) disc
ATOM DX™ incremental encoder system with RCDM rotary (angle) disc Miniature encoder for space critical applications ATOM DX, available in sizes as small as 20.
ATOM4D0-100 - ATOM™ 40 μm linear 1 m cabled readhead with D-type connector for use with RTLF40 or RKLF40 scale
ATOM is Renishaw’s first miniature encoder with filtering optics, providing improvements in dirt immunity, signal stability and reliability.
ATOM2D0-100 - ATOM™ 20 μm linear 1 m cabled readhead with D-type connector for use with RTLF20 or RKLF20 scale
ATOM is Renishaw’s first miniature encoder with filtering optics, providing improvements in dirt immunity, signal stability and reliability.
RMP60-NS-KIT - RMP60 kit
The RMP60 is a compact spindle probe with radio signal transmission and offers automated part set-up and in-cycle gauging on machining centres including 5-axis machines.
R-PCX-10510510-25-6 - M6 Equator-X™ gauge aluminium plate
Renishaw’s fixturing base plates provide a platform for fixtures on an Equator-X 500 gauging system.
R-PCX-10510510-30-8 - M8 Equator-X™ gauge aluminium plate
Renishaw’s fixturing base plates provide a platform for fixtures on an Equator-X 500 gauging system.
A-2237-1101 - SM25-1 scanning module kit
The SP25M comprises two sensors in a single housing.
A-2237-1104 - SM25-4 scanning module kit
The SP25M comprises two sensors in a single housing.
A-2237-1114 - SM25-4 scanning module only
The SP25M comprises two sensors in a single housing.
A4L0Y00Z10F - ATOM DX™ 40 μm pitch, linear and partial arc, top exit readhead (0.1 μm resolution, no cable, 10-way JST (readhead connector) termination, 10 MHz clocked output, and 3-state alarm) for use with RTLF40 or RKLF40 scale
ATOM DX is Renishaw’s smallest incremental optical encoder with digital output direct from the readhead.
A4A0Y15A10F - ATOM DX™ 40 μm pitch, linear and partial arc, cabled readhead (0.1 μm resolution, 3 m cable, 9-way D-type termination, 10 MHz clocked output, and 3-state alarm) for use with RTLF40 or RKLF40 scale
ATOM DX is Renishaw’s smallest incremental optical encoder with digital output direct from the readhead.
A4A0Z15A10F - ATOM DX™ 40 μm pitch, linear and partial arc, cabled readhead (0.5 μm resolution, 1.5 m cable, 9-way D-type termination, 10 MHz clocked output, and 3-state alarm) for use with RTLF40 or RKLF40 scale
ATOM DX is Renishaw’s smallest incremental optical encoder with digital output direct from the readhead.
A-2237-1115 - SM25-5 scanning module only
The SP25M comprises two sensors in a single housing.
A-2237-1113 - SM25-3 scanning module only
The SP25M comprises two sensors in a single housing.
A-2237-1112 - SM25-2 scanning module only
The SP25M comprises two sensors in a single housing.
A-2066-0001 - JCP1M job contact probe and shank
An inspection probe designed specifically for use with manual machine tools for workpiece set-up and simple inspection.
A-2237-1108 - SM25-4 scanning module kit
The SP25M comprises two sensors in a single housing.
A-2237-1102 - SM25-2 scanning module kit
The SP25M comprises two sensors in a single housing.
A-2237-1301 - SH25-1 stylus holder for use with SM25-1
The SH25 range of stylus holders enables accurate scanning measurements with effective stylus lengths ranging from 20 mm - 400 mm.
A-2237-1702 - SH25-2A stylus holder for use with SM25-2
The SH25 range of stylus holders enables accurate scanning measurements with effective stylus lengths ranging from 20 mm - 400 mm.
A-2237-1703 - SH25-3A stylus holder for use with SM25-3
The SH25 range of stylus holders enables accurate scanning measurements with effective stylus lengths ranging from 20 mm - 400 mm.
A-2237-1704 - SH25-4A stylus holder for use with SM25-4
The SH25 range of stylus holders enables accurate scanning measurements with effective stylus lengths ranging from 20 mm - 400 mm.
A-1007-0006 - MCG1 small CMM checking gauge kit for CMMs up to 1 m³
Renishaw's Machine Checking Gauge (MCG) provides a simple method of monitoring CMM volumetric accuracy (to ISO 10360-2 standards) at regular intervals between annual service and re-calibration, or...
A-1007-0056 - MCG2 comprehensive CMM checking gauge kit for all CMMs
Renishaw's Machine Checking Gauge (MCG) provides a simple method of monitoring CMM volumetric accuracy (to ISO 10360-2 standards) at regular intervals between annual service and re-calibration, or...
A-1007-0151 - MCG, 151 mm single arm kit
Renishaw's Machine Checking Gauge (MCG) provides a simple method of monitoring CMM volumetric accuracy (to ISO 10360-2 standards) at regular intervals between annual service and re-calibration, or...
A-1007-0154 - MCG, 380 mm single arm kit
Renishaw's Machine Checking Gauge (MCG) provides a simple method of monitoring CMM volumetric accuracy (to ISO 10360-2 standards) at regular intervals between annual service and re-calibration, or...
A-1007-0155 - MCG, 523mm single arm kit
Renishaw's Machine Checking Gauge (MCG) provides a simple method of monitoring CMM volumetric accuracy (to ISO 10360-2 standards) at regular intervals between annual service and re-calibration, or...
A-2237-1111 - SM25-1 scanning module only
The SP25M comprises two sensors in a single housing.
A-2237-1200 - TM25-20 TTP module adaptor only
The SP25M comprises two sensors in a single housing.
A-2237-1201 - TM25-20 touch-trigger probe module adaptor kit #1
The SP25M comprises two sensors in a single housing.
A-2237-1109 - SM25-4 scanning module kit
The SP25M comprises two sensors in a single housing.
R-PCX-402020-1-20 - 1/4-20 Equator-X™ gauge aluminium plate
Renishaw’s fixturing base plates provide a platform for fixtures on an Equator-X 500 gauging system.
A-2237-1105 - SM25-5 scanning module kit
The SP25M comprises two sensors in a single housing.